Product Range

 
 
Slings
Links & Rings
Wire Rope
Wire Rope Thimbles
Clamps
Ropes
Shackles
Hooks
Sockets
Blocks
Swivel
Hoists
Wire Associated Accessories
Winch & Other Machines
Other Types of Chains
  Turn Buckle
  Multiple Leg Slings with Oval Links
  Rigging / Bottle Screw
  Cable Grip
  Assorted Stainless Steel Products
  Ratchet Lashing System
 
     
     
  Alloy Steel Eye Hooks
     
WASEH 01 WASEH 02 WASEH 03
     
 
     
IMPORTANT SAFETY INFORMATION READ AND FOLLOW
Always visually inspect hook before using.
Inspect hook and threads with magnetic particle and/or dye penetrate annually, or more often in severe operating conditions. (Note: Some Disassembly may be required)
Never use a hook whose throat opening has been increased, or whose tip has been bent more than ten degrees out of plane from the hook body, or is in any other way distorted or bent. Note: A latch will not work properly on a hook with a bent or worn tip.
Never use a hookthat is worn beyond the limits.
Remove from service any hook with a crack, nick, or gouge. Hook with a crack, nick, or gouge shall be required by grinding lengthwise, following the contour of the hook, provided that the reduced dimension is within the limit.
Never repair, alter, rework, or reshape a hook by welding, heating, burning or bending.
Never side load, back load, or tip load a hook.
Eye hooks, shank hooks and swivel hooks are designed to be used with wire rope or chain. Efficiency of assembly may be reduced when used with multiple legs slings.
Always make sure the hook supports the load. The latch must never support the load.
When placing two (2) sling legs in hook, make sure the angle from the vertical to the outermost leg is not greater than 45 degrees, and the included angle between the legs does not exceed 90 degrees*